USEDIn stock
Pallet Support Bar 42" Galvanized
- Length
- 42"
- Rating
- 1,500 lb pair
- Fits
- Step beams
- Finish
- Galvanized
$8.95/eaView →
Racking type
Selective pallet racking
Selective rack is the standard warehouse racking: one pallet deep from each aisle, so every pallet is reachable without moving another. If you have many different products and a regular counterbalance forklift, this is almost always where to start.
Many SKUsStandard forkliftsEasy reconfiguringMixed pallet sizes
Quick facts
- Selectivity
- 100% of pallets
- Depth
- 1 pallet per side
- Common frame depths
- 36", 42", 48"
- Inventory flow
- Any order
How it stacks up
Pallet access5/5
Storage density2/5
Used availability5/5
Cost per position5/5
Single or back-to-back rows
Rows against a wall are single-deep. Rows in the middle of the floor are usually back-to-back, tied together with row spacers. Aisle width is set by your forklift, commonly 10 to 13 feet for counterbalance trucks and narrower for reach trucks.
Built from Redi-Rack or structural steel
Most selective rack is roll-formed Redi-Rack: boltless, quick to adjust and easy to find used. Structural selective rack uses bolted hot-rolled channel and stands up better to impacts and heavy loads.
Accessories that matter
Wire decks, pallet supports, column guards, end-of-aisle guards and row spacers turn a set of frames and beams into a safe, code-ready system. We stock all of them.
Supplied, installed and certified
Whatever system you choose, RackGuy handles it end to end: components from our used stock where it makes sense, installation by our own crews, and a PSR and load signage so it's ready for inspection. How certification works.
In stock now
Full used inventory →USEDIn stock
Row Spacer 12"
- Length
- 12"
- Use
- Back-to-back rows
- Fits
- Redi-Rack
- Hardware
- Bolts incl.
$9.95/eaView →
Common questions
How many pallet positions fit in a bay?
A typical 96 inch bay holds two standard 40 x 48 pallets per level. With three beam levels plus the floor, that is eight pallet positions per bay.
What aisle width do I need?
It depends on your forklift's right-angle stacking requirement. Counterbalance trucks often need about 11 to 13 feet; reach trucks can work in 8 to 10 feet. We confirm this during layout.
Can I add levels later?
Yes. Beams on Redi-Rack can be moved or added in 2 inch increments, as long as the frame's capacity and the new beam spacing are checked.
Related
Redi-Rack Pallet Racking
Used Redi-Rack pallet racking in Southwestern Ontario. Uprights and step beams in stock in common sizes, compatible with most brands. Installed and certified.
Learn more →Structural Pallet Racking
Structural steel pallet racking for heavy loads, freezers and high-traffic aisles. Used structural rack supplied, installed and certified in Ontario.
Learn more →Wire Decking
Wire decking for pallet racking in stock in Ontario. 42x46, 48x46 and more, used and new. Safer storage, better sprinkler flow. Fast delivery and install.
Learn more →Double-Deep Racking
Double-deep pallet racking stores two pallets deep per side, cutting aisles and adding density. Built from used rack, installed and certified in Ontario.
Learn more →Get used rack priced today
Anywhere in Southwestern Ontario. Send a sketch or call with your sizes and we'll come back with layout, parts and install pricing.